Electric Hose Conversion Kit

Description

Electric Hose Conversion Kit

Convert your non-heated hose to a heated hose system. If you own a Crafco EZ-Pour, Cimline, Marathon or any other crack sealing kettle with a non-heated hose, our system allows you to easily convert your crack sealing kettle into an electrically heated hose system. This system is reliable, affordable and an easy to install. Our electric hose heating system is superior to that provided by the kettle manufacturer! (system requires a 3000 watt generator, not included).

ELECTRIC HOSE CONTROLLER

• Automatic Hose Temperature Controller
• Stainless Steel Weather Proof Enclosure Box
• Low and High temperature settings (allows temperature range to be set based on crack sealing material you're using)
• Heat Up Time under 20 minutes
• 120 Volt Plug-In Connector - Plugs into 3000 Watt Generator (not included) or wall outlet
• Automatic Load Bearing (will not draw power unless required)
• Digital Controller displays hose material temperature
• Bypass Feature (allows setting to be adjusted without activation of heater)

HEATED HOSE

• Electrically Heated Material Hose, 20' L
• Safety Shroud with crimped ends
• Insulation
• Thermo Couple
• Braided hose core
• Flexible with 8" bend radius (12" with material inside)
• Light Weight (15 Lbs lighter than Crafco Hose)
• Uses 6 Independent Heating Elements.
• Each Element is wired independently. If a heating element breaks, the remaining elements will continue to function, keeping you operational.
• Removable Hose Shroud with quick connect pin

Compatible with all models of Crack Filling Machines Including Crafco, Cimline, Seal Master, Marathon, Spaulding, Bearcat and others

Call today! 1-518-218-7676 or 888-999-2660