Crafco Poly Flex Type 2 Crack Filler

Description

Crafco Poly-Flex Type 2 Crack Filler

From Product Data Sheet (PDS) on Literature Tab:

Crafco PolyFlex Type 2 sealant is a hot-applied, asphalt based product used to fill cracks and joints in asphalt or Portland cement concrete pavements in moderate to hot climates. PolyFlex Type 2 is supplied in solid form which when melted and properly applied forms a highly adhesive and flexible compound that resists cracking in the winter and resists flow at summer temperatures. PolyFlex Type 2 is used in highway, street, airfield and parking lot pavements and is applied to pavement cracks using pressure feed melter applicators. At application temperature PolyFlex Type 2 is a medium viscosity product which flows and penetrates cracks. PolyFlex Type 2 is formulated as an economical yet effective pavement maintenance crack filling product. Compared to products based on reclaimed rubber, PolyFlex Type 2 offers lower viscosity for easier application, improved summer temperature pick-up resistance, quicker set times, and improved low temperature flexibility. Polyflex Type 2 has been a quality Crafco product for over 25 years. Several states have developed specifications based on performance of PolyFlex Type 2. VOC = 0 g/l.

Call Today 518-513-0895

CRAFCO PolyFlex 2 sealant is a single component, hot-applied. elastically modified asphalt composition which is specifically produced as an economical yet effective pavement maintenance sealing material for use in cracks and joints in asphalt or portland cement concrete pavements. PolyFlex 2 sealant is produced for use in moderate climates. As compared to sealants based on ground reclaimed rubber, PolyFlex 2 sealant offers lower viscosity for easier application, improved summer temperature pick up resistance, quicker setup time and improved low temperature flexibility.