• Show All

Tailgate Chip Spreader Model GS

More images

Price Drop Alert
Items Found Alert
Save to Favorites
Payment Calculator
E-mail to a Friend
View e-Brochure
ID# W-TS-Chip-Spreader
Year NEW
Price $4,595
Shipping Call for Price



First Name

Last Name


ZIP/Postal Code

How can we help you?

Your  Privacy  matters to us.

Overview: Our tailgate mounted chip spreaders deliver stone aggregate from the dump truck to the adjustable feed-gate for full application rate control. Quality built and UNBEATABLE PRICING



Gravity Feed Tailgate Chip Spreader, designed for spreading granular stone/aggregate materials to roadways, for surface-treatment-type paving.

How it Works: By elevating the dump body the aggregate is delivered to an adjustable feed-gate. The 100” wide chip spreader has a feed-gate which is segmented into 8 one-foot wide sections, each can be opened/closed independently. This allows the spread width to be adjusted in one foot increments. Each gate is connected to the Master Operating Rod by a removable chained pin.

Platform: A rear mounted operator’s platform is included with safety tread and guard rail. Platform is set at an angle so as to be at an approximate horizontal position when dump body is elevated.

Aggregates: Various size aggregates can be dispensed from the GS Spreader.

Mounting: Designed to mount on a standard dump body in place of the tailgate. Remove the existing tailgate. Lock the GS Spreader lower pins into the lower latch on the dump body. Raise the chip spreader into position. Once the upper portion of the GS Spreader is aligned against the back of your dump body, mark the proper position of the pins. Your welder will weld the upper pins into the precise position to fit the upper latch.

Measuring: How to measure spreader to fit your dump-truck:
       Height: Measure from inside box from floor to top of existing tail gate 
       Width: Measure across from a flat part of the rear inside of body side walls.
(If you have rounded corners in the bottom, measure from a flat part above this area.)

Height Extensions: If your dump body tailgate height exceeds 32” then you will need to purchase an extension in which case the spreader height will be built taller to make up the difference, thereby preventing material from spilling over the top while discharging.

Width: If your width is something other than 7’ or 7’ 3”, then you have a non-standard sized dump box, for which we do not provide a spreader.


* Spreader is supplied with a set of top mounting pins.

Optional Gate Height Extension: from 33" (0.84m) up to 58", (1.47m)  EXTRA COST applies. (standard gate heights are 32" (0.81m)

CLASS 85 shipping 

Dimensions: L 8'4" X W 4' X H 6'  750 Lbs 
Crated Dimensions: L 9' X W 4'8" X H 6'8" 800 Lbs 

Product Details

Product Details

Category Chip Spreaders
New/Used? New
Product Name Tailgate Chip Spreader Model GS
Product ID W-TS-Chip-Spreader
Year NEW
Size 8'4
Capacity Adjustable gate
Condition NEW
Shipping Dimensions
Lbs KG
Weight 0.00 0
Inches Feet Cm
Length 99.96 8.33 253.90
Width 48.00 4.00 121.92
Height 72.00 6.00 182.88

Recommended Products

Stratos Asphalt Distributors

Hot Deal
Product ID : DMT-400
Our STRATOS DMT-400 is a trailer mounted tack... 
Hot Deal
Product ID : DMT-600
At PavementGroup, our STRATOS DMT-600 sets the... 
Hot Deal
Product ID : DMT-1000
Stratos DMT-1000 is our #1 selling model, giving... 

Recently Viewed

Pavementgroup.com Corporate Office 1525 Western Ave. Albany, NY - Copyright @ 2011-2021 All rights reserved. Unauthorized use of content, images and trademarks prohibited.
All content, specification, images descriptions, pricing, promotions, and availability are subject to change without notice.

View Mobile Version