PT10-WMR

PT10-WMR Asphalt Crack Melter Applicator
FREE SHIPPING. IN STOCK!
Worldwide Shipping Available

Includes:

• 10 Gallon Mixing Chamber
• Mixing Handle (for freeing any blockage)
• Dispensing Shoe (to contain material to crack)
• Hose 4' Long
• Propane Burner
• POL Bottle Connector
• Regulator
• Steel Thermometer
• Platform for Propane Tank

(Note: Propane tank is not included)

Pair this unit with our PT30-SM, 30 Gallon Stationary Melter. This allows you to feed the smaller kettles with the larger kettle. Rather than running the 10 gallon walk behind melters empty each time and waiting for freshly added material to melt, you perform your primary melting with the larger 30 gallon melter. This allows for excellent recovery time. Each time you refill your walk behind melters with hot pour crack sealant, add a few blocks of sealant to the 30 gallon melter to top it off. The crack sealant blocks will melt much faster when emersed into a kettle that's already half full of hot material.

Advantages of PT-10WMR: The PT-10WMR rectangular design allows for more surface area resulting in quicker heat up time, curved bottom for better mixing.

Removable Handle: Removable handle and control levers result in a smaller storage foot print.

Material Valve: Valve at bottom of down spout results in less material drips.

Two Burner Holders: One for heating kettle, second for heating material valve and down spout.

Super affordable, quality-built walk-behind crack sealer. It gives contractors the ability to perform high-quality crack sealing repairing without the need to purchase an expensive pumper kettle. The PT10-WMR saves time and increases profits. The PT-10WMR is a 10 gallon "Asphalt Melting Kettle On Wheels" allowing you to get where bigger kettles can't go (such as between buildings). It also allows the crew to work without dedicating a worker to driving around a truck all day, which is necessary with our larger tow-behind pumper kettles.

Wheels: The kettle wheels are made of 1/8" thick steel, thin but strong. This prevents hot tar from sticking and allows the unit to pass over adjacent cracks that haven't fully cured. If the wheels do accumulate crackfiller, simply melt it off using the torch burner which is included with the kettle.

Agitator: The kettle has a simple hand activated material agitator which frees any blockage that might accumulate at the top of the valve body. Hand agitation of the hot rubberized material also prevents the meltible plastic wrapper from plugging the valve intake.

Durable: Our crack sealant applicators are painted Orange and the inner and outer box are both made from 14 GA steel and will not warp.

Fast Start-Up: Begin crack filling in just 15 minutes!! Complete with a propane burner and hose, the system allows for fast heat up and melting of the crack filler.

The PT-10WMR is quick and can apply material as fast as you can chase the crack!

CALL TODAY: 1-888-999-2660 or 1-518-218-7676