Vibco DCR 1600 Walk Behind Roller
Click on image to enlarge

More images

Click on image to enlarge

Vibco DCR 1600 Walk Behind Roller

Manufacturer: Vibco
Price: $2,750.00
On Sale: $2,110.00
You Save: $640.00
Item # : Vibco-DCR-1600
Weight: Free Shipping
E-mail to a friend
Add To Favorites

Purchase

Overview

We stock Vibco DCR-1600 Vibratory Walk Behind Rollers with the Lowest Price 1-518-218-7676 or 888-999-2660. Call Today

Description

Vibco MODEL DCR-1600 SPECIFICATIONS:

Ideal for asphalt, landscaping maintenance, pothole repairs and all other asphalt repairs on roads, driveways and parking lots. 

  • Operates using trucks 12 Volt Electric
  • Light Weight
  • One Man Operation

FEATURES

  • Centrifugal Force Lbs/N: Up to 1,600.Lbs/7120
  • Vibrations Frequency: Up to 5,000 Vibrations per minute
  • Compaction Depth: 8"
  • Electric Motor: 12 VoltDC x 32 Amp
  • Self Propelled Forward
  • Receptacle for Truck utility plug
  • Electrical Cable: 30' long
  • Water Tank: 1 Gallon, poly, with gravity drip water system
  • shock absorber system
  • Roller Drum Diameter: 6"
  • Roller Drum Length: 12" 
  • Weight: 97 Lbs, 44Kg

“Fix Your Potholes Permanently”VIBCO Model DCR-1600 is a 12 Volt DC electically operated vibratory roller with a 6” diameter 12” long drum, providing compaction of up to 8” deep, with a compaction force of over 1,000 lbs at 5000 vibrations per minute. The watertank is standard and the simple to operate controls turns the vibration on and off instantly.  The DCR-1600 vibratory roller is easy to handle at only 98 LBS!!  

NEED A REFERENCE?!   
NY City operates 45 of these units while St Louis MO uses 10! 

Throw-and-Roll

Made more permanent with Vibco DCR-1600

The throw-and-roll method consists of the following steps:

  1. Place mixture into the pothole which may or may not be filled with water and debris. Use any type of hand tool such as a shovel or pitchfork to fill the hole. Fill the hole so that there is a crown in the center.
  2. Compact the material by rolling over it 6 to 8 times with truck tires. Some crews have found it useful to cover the patch with sand before rolling a truck over the patch to prevent material from sticking to tires.
  3. Check the level of the patch to make sure the center of the patch is ¼” to ½” above the pavement surface.
  4. If the patch is low add more cold mix and repeat the patching steps again.

The preferred method, similar to the standard “throw-and-go”, “dump-and-run” or the “pitch-and-pat” methods, utilizes compaction with a vibratory roller, which provides a tighter patch for traffic to drive over it without creating depressions and it provides better water runoff. The extra 1 to 2 minutes to compact the patches will produce a significantly better patch.

Shortest lead times in the business. Generally In Stock, please call to confirm!
Lowest Prices you’ll find. Free Shipping in the USA (Lower 48)
We Ship Internationally

1-518-218-7676 or 888-999-2660. Call Toll Free